Lab / DMS V0
What counts as sufficient coverage?
Explore how sensor position and an assumed circular radius change the estimated fraction of a bounded area that is geometrically covered.
Follow the Chapter 1 experiment: predict a change, record the reference, find a passing configuration, then move it toward a corner with the radius unchanged.
One sensor. One explicit criterion.
Initialized from SCN-001. Change position or radius, then record separate trials below to compare them against the same criterion.
Area: 100 × 100 model units. Origin is the upper-left corner; x increases right and y increases down. Filled disk: ideal footprint. Dark dot: sensor position.
FAIL — 38.52% estimated coverage; threshold 50.00%.
3852 / 10000 cell centers covered. Margin: -11.48 percentage points.
Compare separate single-sensor trials
Record up to four configurations. Each row is a separate one-sensor what-if run with the same area, threshold and model; rows do not combine sensors. Reset keeps your rows. Reloading or leaving this page discards them.
No configurations recorded.
| Trial | x | y | Radius | Coverage estimate | Margin (pp) | Criterion |
|---|
Positions and radii use model units; margins use percentage points. A larger margin does not establish optimality: cost, installation constraints and real sensing performance are not evaluated.
Definition and interpretation
REQ-COV-001 defines the 50% criterion. This threshold is a teaching assumption, not an operationally derived target. TEST-COV-001 evaluates the reference scenario using MODEL-COV-001 v0.1.0.
Method: cell-center-grid, 100 × 100 equal-area cells. A cell is covered when its center’s distance is ≤ radius; zero radius means zero coverage. This is a sampled estimate, with discretization error. The smooth circle depicts the ideal footprint, not the sampled cells. PASS uses the unrounded estimate and includes equality.
- One fixed ideal circular footprint in a uniformly weighted rectangular area.
- No terrain, occlusion, uncertainty, time, faults, or communication effects.
No directional sensitivity or real sensor calibration is modeled. Area coverage is not detection probability, tracking performance or mission effectiveness. A PASS only satisfies this idealized geometric criterion.